Navigation Information Sub-State
Editing the Auto CDI Scaling Option (continued)
Action
3.
SEL
4.
5.
6.
200
Pressing SEL activates editing. The
active selection will flash.
Turn the Small knob to Automatic or
Manual scaling. Press ENT to save
ENT
your choice.
Change the manual resolution while
"MANUAL" is flashing. Turn the
Large, outer knob. The sensitivity
value will flash.
Turn the Small, inner knob to select
0.30, 1.00, or 5.00 nm full scale
deflection per side. Press ENT to save
your choice.
ENT
Operations
Explanation
SYS
SYS
SYS
SYS