Table of Contents
Advertisement
Operations
2.
SEL
3.
5.
ENT
Starting/Stopping Altitude Hold
Altitude Assist features require the system include a F/ADS or an
altitude encoder sensor. The following procedure is used to start or
stop the Altitude Hold feature. When active, Altitude Hold alerts you
with a message when you have ascended/descended into the buffer, or
when you stray outside the buffer. The Buffer Altitude is the altitude
above and below your Hold altitude at which you want to be alerted
with a message.
Turn the Small knob to display the
Hold Altitude page. Pressing SEL
activates editing.
NAV
Turn the Small knob to display the
desired Hold Altitude. The altitude is
chosen in increments of 50 ft. Turn the
Large knob to make the Buffer value
flash.
NAV
Turn the Small knob to display the
desired Buffer Altitude value. The
Buffer altitude is chosen in increments
of 10 ft. Pressing ENT enters the
displayed values.
NAV
Nav Mode Procedures
91
Advertisement
Table of Contents
