Operations
Creating a User Waypoint by Latitude/Longitude (cont'd)
If you want to quickly establish a waypoint as you fly over a
position, you may choose to accept the automatically
assigned numerical identifier instead of naming the waypoint.
Pressing ENT at this point in the procedure eliminates the
need to execute steps 3 and 4.
3.
4.
ENT
Hint
Turn the Small knob to display the desired
character. Turn the Large knob to make
the next character you want to change
flash. Repeat to edit the identifier,
Latitude, longitude, and the runway
length. The identifier may contain up to
six characters. When a waypoint is
created at the location of the waypoint, it
is not necessary to edit the position
coordinates (Latitude/Longitude).
DB
Press ENT to store the waypoint in
memory.
DB
If a duplicate identifier is entered, the display
below appears for approximately 3 seconds.
The NMC then displays the waypoint editing
page so you can change the identifier.
DB
DB Mode Procedures
129