System Status Button; Figure 36: System Control Center Button Links; Table 8: Button Links On System Control Center Screens; Table 9: Meaning Of System Status Button Colors - Hughes HughesNet HN9000 Installation Manual

Click the button to go to the page identified by the label.
The destination page for each button link is identified below:

Table 8: Button links on System Control Center screens

Button
System Status System Status page
Reception Info Reception Information page
Transmission Info Transmission Information page
Terminal Status Terminal Status page
System Info System Information page

System Status button

The System Status button (only) is a status indicator as well as a link. It changes color to indicate the satellite modem's
current status, as explained in Table 9: Meaning of System Status button colors on page 59. To see more detailed status
information, click the System Status button to open the System Status page.

Table 9: Meaning of System Status button colors

Button color
Green
Yellow
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A

Figure 36: System Control Center button links

Destination
Displays general status information such as signal strength and
commissioning status. For more information see System Status
page on page 62.
Displays statistics about received data and receive connection
status. For more information see Reception Information page
on page 63.
Displays statistics about the transmitted data and transmit
connection status. For more information see Transmission
Information page on page 64.
Displays detailed information about the operational status of
the satellite modem. For more information see Terminal Status
page on page 64.
Displays system information such as ST Name (assigned name
of the satellite modem name) and operational software version.
For more information see System Information page on page
66.
OK – The satellite modem is operating normally.
Degraded – Degraded means performance is degraded for any of the following reasons:
• The Web Acceleration not functioning or in progress. Web Acceleration may be
temporarily inactive while you are browsing on a secure HTTP site (https).
• The modem is in fallback mode.
• A number of transmissions beyond a certain threshold have not been received by
the satellite (state code 30). This could be caused by weather conditions.
Description of destination page
Meaning
Chapter 8
59