System Status Button; Table 4: Meaning Of System Status Button Colors - Hughes HN9000 User Manual

Chapter 2
Button
Reception Info
Transmission Info
Terminal Status
System Info

System Status button

The System Status button (only) is a status indicator as well as a link. It changes color to indicate the satellite modem's
current status, as explained in Table 4: Meaning of System Status button colors on page 12. To see more detailed status
information, click the System Status button to open the System Status page.

Table 4: Meaning of System Status button colors

Button color
Green
Yellow
Orange
Red
If the System Status button is red
Control Center information pages (those with tables listing parameters and values). The red flag indicates a problem
related to the parameter listed next to the flagged value. Click the parameter name to see a pop-up window that may
include helpful information, depending on what the problem is.
12
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. A
Destination
Reception Information page
Transmission Information page
Terminal Status page
System Information page
OK – The satellite modem is operating normally.
Degraded – Degraded means performance is degraded for any of the following reasons:
• The Web Acceleration not functioning or in progress. Web Acceleration may be
temporarily inactive while you are browsing on a secure HTTP site (https).
• The modem is in fallback mode.
• A number of transmissions beyond a certain threshold have not been received by
the satellite (state code 30). This could be caused by weather conditions.
FAP threshold exceeded – The satellite modem has exceeded the FAP threshold specified
in the HughesNet service plan. Subscribers who exceed the threshold experience reduced
download speeds for approximately 24 hr.
Problem detected – There is a problem with satellite transmit or receive connectivity
or both.
or yellow
Description of destination page
Displays statistics about received data and receive connection
status. For more information see Reception Information page
on page 15.
Displays statistics about the transmitted data and transmit
connection status. For more information see Transmission
Information page on page 16.
Displays detailed information about the operational status of
the satellite modem. For more information see Terminal Status
page on page 17.
Displays system information such as ST Name (assigned name
of the satellite modem name) and operational software version.
For more information see System Information page on page
19.
Meaning
, you can look for a red flag next to any value or values on the System
System Control Center