•
Terminal Status page
•
System Information page
Each status and information screen contains categories of parameters that relate to various aspects of satellite modem
operation, as explained in the sections that follow for each status and information screen. To see a definition of any
parameter, click the parameter name. The definition appears in a pop-up window. For many parameters this window
also includes additional information. If you do not see the pop-up window, it may be hidden by other windows; in this
case, minimize other open windows.
State codes on status and information screens
A state code is a number that indicates the operational state of the satellite modem. State codes are displayed with an
explanation in words, as shown in the following example. On the System Control Center status and information screens,
state codes are shown next to selected parameters, as shown in Figure 39: Example of a state code on page 61, or next
to a parameter that is related to an error condition.
For a list and explanation of all state codes, see Table 10: State codes on page 67.
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A
Figure 38: Format of status and information screens
Figure 39: Example of a state code
Chapter 8
61