Accessing The Advanced Pages; Figure 53: Icon For Accessing Advanced Pages - Hughes HughesNet HN9000 Installation Manual
Hide thumbs
Also See for HughesNet HN9000:
- User manual (82 pages) ,
- Manual (10 pages) ,
- Replacement manual (2 pages)
Table of Contents
Advertisement
Chapter 11
Accessing the Advanced Pages
To access the Advanced Pages:
1. Launch a web browser.
2. Type www.systemcontrolcenter.com or 192.168.0.1 in the browser address bar and press Enter.
Note: To use 192.168.0.1, the satellite modem must be configured for a private IP address, and DHCP must
be enabled on the computer.
The System Control Center home page appears.
3. Click the small icon below the System Info button. This icon is indicated by the arrow in Figure 53: Icon for accessing
Advanced Pages on page 82.
The Advanced Configuration and Statistics screen appears, as shown in Figure 54: Advanced Pages example showing
the Advanced menu on page 83.
An alternate way to open the Advanced Pages is to type www.systemcontrolcenter/stlui/fs/advanced in the browser
address bar and press Enter.
Figure 54: Advanced Pages example showing the Advanced menu on page 83 shows one of the many available Advanced
Pages, the Terminal Initialization Sequence screen, which appears during installation. This Figure shows the Advanced
menu in the left panel.
82
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A
Figure 53: Icon for accessing Advanced Pages
Advertisement
Table of Contents
Troubleshooting
