Chapter 2: Preparing For Installation - Hughes HughesNet HN9000 Installation Manual

Chapter
2
Preparing for installation
Topics:
Installation summary
Conducting a site survey
Instructions for other terminal
components
Power supply information
Primary tools and equipment
needed for installation
Additional equipment
Computer requirements
Setting the installer laptop IP
address
This section describes preparations for installing the satellite modem and includes
information you should know before you begin. Review this information before
you install the satellite modem, antenna assembly, antenna mount, or IFL cables.
Refer also to Installation summary on page 8.
To install the satellite modem, you need the Installation Reference Sheet. This
form includes parameters you need to enter to install the modem (A code, B
code, C code, and U code, which are explained later). Print the Installation
Reference Sheet for your specific installation from the online HughesNet
Installation Portal.
Before you proceed, review the sections in this chapter, which are listed in the
left panel.
7