Transmission Information Page; Information About Selected Parameters; Terminal Status Page; Figure 43: Transmission Information Page - Hughes HughesNet HN9000 Installation Manual
Hide thumbs
Also See for HughesNet HN9000:
- User manual (82 pages) ,
- Manual (10 pages) ,
- Replacement manual (2 pages)
Table of Contents
Advertisement
Chapter 8
Transmission Information page
The Transmission Information page shown in Figure 43: Transmission Information page on page 64 displays information
about data transmissions from the satellite modem.
The operational parameters listed on the Transmission Information page are shown in a tabular format. The first (left)
column identifies the parameter categories:
•
Satellite Interface Statistics – Contains information on transmit status and signal strength, as well as
transmission-related error messages.
•
Traffic Statistics: Transmit – Contains statistical information on the specific data transmitted to the satellite from
this satellite modem.
Information about selected parameters
This section provides information for selected parameters on the Transmission Information page. Parameters that may
be most useful for you to know about are listed.
Total Satellite Packets Transmitted – An increasing count of Total Satellite Packets Transmitted indicates that your
satellite modem is successfully transmitting data.
Terminal Status page
The Terminal Status page displays information about the operational state of the satellite modem and operational statistics
such as messages and packets sent, received, and dropped. It indicates whether acceleration is enabled and provides a
count of traffic that moves across the LAN to the satellite modem.
64
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A
Figure 43: Transmission Information page
Advertisement
Table of Contents
Troubleshooting
