Text Links; Figure 34: System Control Center Home Page - Hughes HughesNet HN9000 Installation Manual

Note: On some screens you may see the word terminal. This word refers to the satellite modem.

Text links

The System Control Center home page includes the following text links:
System Status links
• View System Status – Opens the System Status page, which displays general system status information such as
signal strength and administrative status.
• View Reception Information – Opens the Reception Information page, which displays information on data received
by the satellite modem.
• View Transmission Information – Opens the Transmission Information page, which displays information on data
transmitted by the satellite modem.
• View Terminal Status – Opens the Terminal Status page, which displays detailed information about the operational
status of the satellite modem such as interface packet counts and acceleration statistics.
• View System Information – Opens the System Information page, which displays information such as modem
identification information and IP address information.
Note: These links take you to the same destinations as the button links at the top of each System Control Center
page.
Diagnostic utilities link
Connectivity Test – Opens the Connectivity Test page, which can be used to test the connection between the satellite
modem and the satellite. If you can access the satellite, there is no problem with your physical site connectivity between
the modem (inside) and the radio assembly and antenna (outside). See Connectivity Test page on page 71.
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A

Figure 34: System Control Center home page

Chapter 8
57