System Status Button - Hughes HN9800 Installation Manual

Button
System Status
Reception Info
Transmission Info
System Info

System Status button

Chapter 6 • System Control Center
44
1039707-0001 Revision A
The destination page for each button link is identified below:
Table 3: Button links on System Control Center screens
Destination
System Status Page
Reception Information page Displays statistics about received data. For
Transmission Information
page
System Information page
The System Status button (only) is a status indicator as well as a link. It changes color
to indicate the satellite modem's current status, as explained in Table 4. To see more
detailed status information, click the System Status button to open the System Status
page.
Button color
Green
Red
Yellow
Orange
If the System Status button is red
value or values on the System Control Center information pages (those with tables
listing parameters and values). The red flag indicates a problem related to the
Description of destination page
Displays general status information such as
signal strength and commissioning status.
For more information see
page
on page 48.
more information see
Information page
Displays statistics about transmitted data.
For more information see
Information page
Displays system information such as the
satellite modem's serial number and
software version. For more information see
System Information page
Table 4: Status button colors
The satellite modem is operating normally. (OK
appears beneath the
page 44.)
A problem has been detected.
Performance is temporarily impaired because:
• There may be a problem with Web Acceleration.
• The modem may be temporarily using a backup
configuration.
• There may be virus activity.
Degraded – The modem is fully operational, but
performance is temporarily impaired because the
daily download allowance has been exceeded.
or yellow
System Status
Reception
on page 49.
Transmission
on page 51.
on page 53.
Meaning
System Status button
on
, look for a red flag next to any