Environmental Specifications; Defaults; Initial Panel State; Configuration Page - GRASS VALLEY NV9605 User Manual

Environmental Specifications

NV9605 Environmental Specifications
Specification
Operating temperature
Relative humidity
Cooling

Defaults

Initial Panel State

Destination: the configured default.
Buttons: low-tally is 40% brightness by default and stays at its most recent setting.

Configuration Page

The initial NV9605 configuration has no buttons defined. The default panel options are:
Behavioral model:
Release mode:
Default destination:
Status monitor:
Data routing mode:
Default name set:
All other options:

DHCP

The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a
fixed IP address using the Panel IP Configuration Utility.
Detail
0–30 ° C, ambient.
0 to 90%, non-condensing.
No fan required.
Limited X-Y.
Normal.
None.
None.
Automatic.
System names.
Disabled (check boxes clear).
NV9605
User's Guide
55