Battery Replacement
Battery Removal Procedure
Battery Removal Procedure
Preliminaries
Take note of the warnings and cautions in
In particular, take note of the:
Requirements
• An anti-static work surface.
• A soft cloth on which to place the unit, display-side down, to protect the display.
• Replacement battery unit:
Tools Required
• Small tweezers.
• Medium sized Philips screwdriver.
• Double-sided adhesive tape.
Removal Procedure Steps
The battery replacement procedure is described below and assumes that the unit is rack-
mounted:
•
Step 1: Uninstall ATP-2000 Panel Unit from Rack
•
Step 2: Panel Unit Disassembly
•
Step 3: Remove Battery Unit
•
Step 4: Refit Battery Unit
•
Step 5: Panel Unit Reassembly
•
Step 6: Re-Install in Rack
62
IMPORTANT
Follow static precautions at all times when handling this equipment.
Servicing should be done in a static-free environment.
• battery handling warnings
• electrostatic discharge (ESD) cautions and protection advice
• lithium battery warnings
• battery disposal information
Battery unit:
Grass Valley Part Number
Important Safety
(see
Battery
Handling, on page viii);
(see
Electrostatic Discharge (ESD)
(see
Lithium
Batteries, on page xiv); and
(see
Battery
Disposal, on page xiv).
ATP-BAT01
Information, on page v.
Protection, on page viii);