Logging Network Topology Change - Renesas R9A06G037 User Manual

PRIME v1.4 Base Node Tool
User Manual

3.17 Logging network topology change

This feature enables BN tool to record every network topology change as a text file. To active this
feature, select "Output Start" in "Topology" menu which is submenu of "File" menu.
All network topology change log files are found in the folder BN tool is installed. The file name format
is " prime14_cpx3_pc_bn_topo_%Y%m%d%H%M%S.log". For example, if the file contains some
information for the topology change at 12:00:00 Sep 30, 2016, the file name should
be "prime14_cpx3_pc_bn_topo_20160930120000.log".
The topology change log file shows six parameters for each node.
-
EUI48 EUI-48 of the node.
-
SID SID of the node.
- LNID LNID of the node. For Base Node "0000" is given.
LSID Local SID of the node. For Base Node "00" is given. For a Terminal Node "FF" is given.
-
-
VERSION PRIME version of the node.
v1.3.6: "00"
v1.4 BC: "01"
"02"
v1.4:
-
STATE The state of the node.
Terminal Node:
Switch Node:
Base Node:
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Figure 3.64 Operation to active logging network topology
"01"
"02"
"03"
Figure 3.65 Sample of the topology change log file.
Renesas Electronics Group Confidential
.
3 PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 70 of 82