Renesas R9A06G037 User Manual page 16

PRIME v1.4 Base Node Tool
User Manual
Item Description
Evaluation Board Using Evaluation Board
J70 (RTK0EE0003D01001BJ) or J71
(RTK0EE0003D03001BJ) can be selected.
Channel Channel Select for PRIMEv1.4
CENELEC-A mode or Global mode (Ch.1,
Ch.2, ... Ch.8, FULL, FCC or ARIB) can be
selected.
SNA Subnetwork Address (setting dialog pops up) ABCDABCD0001
SPC Security Profile
No SPC, SP1 or SP2 can be selected.
SWK SWK setting (setting dialog pops up).
SAR Segmentation
packet size
NOTE: In case of "BC Mode on", if this value
is specified larger than 48Byte, 48Byte is
applied to this value.
REG SAR_SIZE MAX size of SAR packet
This value is applied to REG_RSP packet.
REG RM_F RM_F field in REG control packet
The value is applied to REG_RSP packet.
BN BCN FREQ Beacon Frequency of BN
BN BCN FRA LEN Beacon Frame Length of BN
BN BCN MOD Beacon Modulation of BN
SW BCN FREQ Beacon Frequency of Switch nodes
BC Mode BC Mode on/on(v1.3.6)/off
NOTE: "on(v1.3.6)" does NOT use the robust
modulation (DBPSK_R, DQPSK_R).
Delay Interval time of between each sending a data
packet
DCU Connect DCU Connect on/off and Port setting (setting
dialog pops up)
ARQ WINSIZE Window size used for ARQ
The value for ARQ.WINSIZE field in ARQ
sub header.
SEC Format Use old SEC format on/off
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Table 3-2 Setting Menu Item
and Reassembly
Renesas Electronics Group Confidential
.
3 PC Tool operation procedure
Default setting
J70
CENELEC-A
No SPC
(SAR) 64Byte
255Byte
0: Disable
Every frame
1104 symbols
DBPSK-CC
8 frame space
Off (v1.4)
500 msec
Off
ARQ.WINSIZE(TX): 1
ARQ.WINSIZE(RX): 1
Off
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Applied timing
Booted
Booted
Booted
Booted
Booted
Anytime
Booted
Booted
Booted
Booted
Booted
Booted
Booted
Anytime
Booted
Booted
Booted
Page 16 of 82