PRIME v1.4 Base Node Tool
User Manual
3.6.2.3
AppEmu cycle test log
The result of AppEmu cycle test is stored in "%Y%m%d%H%M%S_prime14_cpx3_pc_bn_appemu.log"
which is created in the same directory with the Base node tool.
- Cycle shows the cycle number of the test.
- Node shows the number (starts from 0000) of the destination SN.
- SID shows the SID of the destination SN.
- LNID shows the LNID of the destination SN.
- SERIAL shows the serial number of the connection.
- Step shows the step number of the test.
- Size shows the size of transmitting packet.
- Result shows the result of the test. "SUCCEEDED" is displayed when a packet is received from SN
in time. "FAILED" is displayed when no packet is received.
- Start_At shows internal time stamp [100ms].
- Attempt shows the count of the transmitting times.
- Txcod_1st/2nd/3rd shows the modulation of each transmitting packet. When 2nd or 3rd packets do
not exist, "-------" is displayed.
- Rxcod shows the modulation of receiving packet. "-------" is displayed when no packet is received
- Round_Trip_Time shows the round-trip time [100ms].
Figure 3.17 shows an example of AppEmu cycle test log.
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Figure 3.17 Example of AppEmu cycle test log
Renesas Electronics Group Confidential
.
3
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 31 of 82