Table of Contents
Advertisement
PRIME v1.4 Base Node Tool
User Manual
3.13.3
Reset SN Statistics
BN requests SN to clear the statistics information. The statistics information is cleared individually or
altogether by editing "Edit SN Management Parameters" dialog. The statistics information is as follows.
- Number of times for each modulation of the transmitted Data packet.
- Number of times for each SNR of the received Data packet.
- Number of times it was reset and for each modulation of the transmitted REG_REQ packet.
- Information of the beacon SN detected until it completes the registration process.
3.13.4
Software Reset
BN forces SN to execute software reset. When this function is executed, BN treats the target SN as
unregistered node immediately. The following processes are executed in order.
- BN sends "Reboot destination device (MGMT.TYPE=0x04) message" to the SN.
- BN deletes the information about the target SN. The SN disappear from the topology window of BN
tool.
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Figure 3.56 Example of SN's statistical log
Renesas Electronics Group Confidential
.
3
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 61 of 82
Advertisement
Table of Contents
