Get Bn Statistics; Reset Bn Statistics - Renesas R9A06G037 User Manual

PRIME v1.4 Base Node Tool
User Manual
3.14.2

Get BN Statistics

BN tool stores statistics information of the peer communication quality and generates log file
"%Y%m%d%H%M%S_prime14_cpx3_pc_bn_getbnstats.log".
Push "Get BN Statistics" button in the BN statistics category on the panel to get the log file.
This file contains following information.
- Number of times for each modulation of the transmitted Data packet.
- Number of times for each SNR of the received Data packet.
Details of the contents described in the log are described follow.
- SID shows the SID of SN that acquired statistical information.
- LNID shows the LNID of SN that acquired statistical information.
- EUI shows the EUI of SN that acquired statistical information.
- DBPSKR shows the number of the transmitted Data packet via downlink using DBPSK-R. Similarly,
XXX show the number of transmitted Data packet via downlink using each modulation. ("XXX" is
each modulation.)
- SNR[0..7] shows the number of the received Data packet via uplink for each SNR value of
PHY_SNR.
3.14.3

Reset BN Statistics

BN clears the statistics information.
Push "Reset BN Statistics button" in the BN statistics category on the panel to clear it.
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Figure 3.58 Example of BN's statistical log
Renesas Electronics Group Confidential
.
3 PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 63 of 82