Renesas Solution Starter Kit for RX23W
4.6
The 'Pins' tabbed page
Smart Configurator assigns pins to the software components that are added to the project. Assignment of the
pins can be changed using the Pins page.
4.6.1
Change pin assignment of a software component
To change the pin assignment of a software component in the Pin Function list, click
show by Software Components.
R20UT4449EG0100 Rev. 1.00
Aug.30.19
Figure 4-40 The 'Pins' tabbed page
Figure 4-41 Change view to show by Hardware Resource
4. Smart Configurator Using the e
to change view to
studio
2
Page 36 of 64