Remote Firmware Upgrade; Feature; Remote Firmware Upgrade Procedure - Renesas R9A06G037 User Manual

PRIME v1.4 Base Node Tool
User Manual
3.7

Remote Firmware Upgrade

3.7.1

Feature

-
This Remote FU function conforms PRIME v1.4 standard (signature is not supported).
-
BN send the Firmware Image to SN by the Unicast connection. (Multicast is also supported)
-
SN Firmware Image is distributed in *.fws file which includes both of RX631 and CPX3 FW image
data.
-
ARQ is always enabled during the Unicast data transmission.
-
The transfer rate and Progress indicator is displayed during FU process.
-
Cancelation FU process is supported.
3.7.2

Remote Firmware Upgrade procedure

(1) Start "prime14_cpx3_pc_bn_RevXXX.exe".
(2) Wait until SN is registered to the network.
(3) Select a single destination device (SN).
(To try FU with multicast connection, select some destination devices and select "Multicast" radio
button in the Transmission field)
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Figure 3.23 Select a single destination device
Renesas Electronics Group Confidential
.
3 PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 38 of 82