Data Settings; Context Table - Renesas R9A06G037 User Manual

PRIME v1.4 Base Node Tool
User Manual
address compression method.
- "Unicast Connection Timeout" specifies the time until the unicast connection with CL Type = 6
(CL_IPv6_UNICAST) is released with timeout.
- "Multicast Connection Timeout" specifies the time until the multicast connection with CL Type = 6
(CL_IPv6_UNICAST) is left with timeout.
3.16.5

Data Settings

- "Next Header" specifies the value of "Next Header" field in the IPv6 packet header.
- "Src Address" specifies the value of "Source Address" field in the IPv6 packet header. If the "Use BN
Link-local" is checked, the link-local address is used that is composed of
"Modified EUI-64" as an interface ID. If user wants to use an address other than the link-local
and
address, set the address to the
- "Dest Address" specifies the value of "Destination Address" field in the IPv6 packet header. If the
"Link-local" is selected, the link-local address is used that is composed of
"Modified EUI-64" as an interface ID. If user wants to use an address other than the link-local
and
address, set the address to the
link-local address of the node is shown in the
3.16.6

Context Table

The BN tool can edit the context table used for the stateful address compression. By checking the
"Enable" column, the specified context information activates.
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
"Src Address" box
without checking
"Dest Address". Additionally, by pushing the "Load" button, the
"Load address table from EUI" box.
Renesas Electronics Group Confidential
.
3 PC Tool operation procedure
fe80::/64
"Use BN
Link-local".
fe80::/64
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
as a network ID
as a network ID
Page 69 of 82