PRIME v1.4 Base Node Tool
User Manual
3.5
Unregistration
BN tool has the function to change SN from Terminal/Switch to Disconnected. This is optional
function.
◼
Unregistration procedure
(1) Select SN (i.e. SN #ABCDABCD0003).
(2) Start by "Unregist" button.
(3) SN is changed from Terminal(Switch) to Disconnected.
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Figure 3.15 PC tool screen at "Unregistration"
Renesas Electronics Group Confidential
.
3
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 28 of 82