Table of Contents
Advertisement
PRIME v1.4 Base Node Tool
User Manual
ECCT -> DLMS over TCP Connections
-
Following is an example image from 4CCT manual. Please set the IP address of host PC which is
installed the Renesas BN Tool, and set the TCP Port Number (4063. It is default for DLMS over TCP).
Figure 3.40 Example of DLMS over TCP configuration screen (reprinted)
CCT -> CCT cycles
-
Following is an example image from 4CCT manual. Please set the configuration file to start a cycle
reading.
Figure 3.41 Example of cycle file upload screen (reprinted)
(3) Wait until CCT cycles is executed.
(4) See the results that are output to FTP upload (cycles) configuration.
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Renesas Electronics Group Confidential
.
3
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 49 of 82
Advertisement
Table of Contents
