PRIME v1.4 Base Node Tool
User Manual
3.3.1
Single Path Test
◼
Test procedure
(1) Select SN (i.e. SN #ABCDABCD0002).
(2) Set Data length (i.e. 64 bytes)
(3) Select ACK = None.
(4) Select ARQ.
(5) Start by "Send" button.
(6) Data packet is displayed
- Data direction is BN to SN only.
(7) Result is displayed at bottom of BN tool.
(8) "Counter Reset" button can clear a data packet log on the log window.
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Figure 3.8 PC tool screen at "Single Path Test"
Renesas Electronics Group Confidential
.
3
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 21 of 82