Table of Contents
Advertisement
M-Station Baseboard
Use the navigation buttons to browse to the directory where the file you wish to program is located.
Select the file, verify that it appears in the File name text box, and click Open to open the file and
return to the command window.
Clicking Cancel returns to the command window without changing the file selection.
9.2.2
Device Selected and Change Device Type
The Device box shows the name of the flash device as read from the silicon signature contained in the
device. This name matches that read from the .PRC file.
Click Change Device Type to open a different .PRC file. Normally you would only need to do this
when changing to a different type of device, by first disconnecting one micro-board and connecting to
another. You should not need to use this button under normal circumstances.
9.2.3
Status
The Status window is normally blank when the FP4MST program is between operations. During a
flash-programming operation, the Status line displays various messages indicating the progress or
status of the operation.
54
Advertisement
Table of Contents
