Renesas R9A06G037 User Manual page 37

PRIME v1.4 Base Node Tool
User Manual
3.6.4.2 BN Statistics Information with AppEmu Cycle Test Result
BN stores the statistics information of peer communication quality during the AppEmu cycle test.
It outputs log file "%Y%m%d%H%M%S_prime14_cpx3_pc_bn_statistics.log" contains following
information.
- Number of times for each modulation of the transmitted Data packet.
- Number of times for each SNR of the received Data packet.
Details of the contents described in the log are described follow.
- Cycle_No shows the cycle number of the test.
- Node_No shows the number (starts from 0000) of the destination SN.
- SID shows the SID of SN that acquired statistical information.
- LNID shows the LNID of SN that acquired statistical information.
- EUI shows the EUI of SN that acquired statistical information.
- Destination shows the EUI of the destination SN.
- DataSize[bytes] shows the size of transmitting packet.
- CycleTime[100ms] shows the time of each cycle.
- Success shows the total number of successful times for each step.
- Failed shows the total number of failures for each step.
- Retransmittion shows the total number of re-transmission of each cycle.
- DBPSKR shows the number of the transmitted Data packet via downlink using DBPSK-R. Similarly,
XXX show the number of transmitted Data packet via downlink using each modulation. ("XXX" is
each modulation.)
- SNR[0..7] shows the number of the received Data packet via uplink for each SNR value of
PHY_SNR.
Figure 3.22 Example of BN's statistical log for AppEmu test
R11UM0156EJ0240 Rev.2.40
Jul. 28, 2020
Renesas Electronics Group Confidential
.
3 PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Page 37 of 82