Emission Warning Indicator On The White Light Laser; Emission Warning Indicator On Other External Lasers; Malfunction Of Emission Warning Indicator - Leica TCS SP8 STED 3X User Manual

10.4.1

Emission Warning Indicator on the White Light Laser

The emission warning indicator of the achromatic light laser is located on the front of the achromatic
light laser (see Figure 17) and is red when lit.
Figure 17: Emission warning indicator on the white light laser
10.4.2

Emission Warning Indicator on Other External Lasers

10.4.3

Malfunction of Emission Warning Indicator

WARNING
•
•
•
Observe the user manuals for external lasers
Please refer to the information from the documents provided by the
laser manufacturer for the external lasers. Pay particular attention to
the laser manufacturer's notes!
Malfunction of emission warning indicator
You must immediately disconnect the system from the power supply
if any of the following occur:
The emission warning indicator is not lit after being switched on
using the detachable-key switch.
The indicator continues to be lit after being switched off using
the keyswitch
Scanning of the specimen is not activated after being switched
on properly (laser radiation in the specimen area).
If any of these occur, immediately notify the Leica branch office in
your country or your local contact person.
Safety Features
47