11
12
To switch on the white light laser, activate the key switch on
the front side of the white light laser.
White light laser error messages
An error report appears on the display of the white light
laser:
•
If the room temperature exceeds 40 °C. In this case,
switch off the white light laser and switch it back on only
after the room has been cooled.
•
For shocks. In this case, switch the white light laser off,
then on again after 10 seconds.
After the workstation has started, log on to the operating
system.
Using a personalized user ID
Use your personal user ID if one has been set up. This
ensures that user-specific settings are saved and
maintained for this user only. If the system administrator has
not yet assigned a personal user ID, log on as "TCS_User".
The default password is "True!Confocal55".
Change password
After logging on with your own user ID, you may change
your password. To do so, press the Ctrl, Alt and Del keys at
the same time.
Then, click Change password. The Change password dialog
box opens.
Now you can start the LAS X software.
Switching the System On/Off
73