Maintenance; Having Coolant Replaced; Cooling Systems On External Lasers And Other Peripheral Devices - Leica TCS SP8 STED 3X User Manual

19

Maintenance

NOTICE
19.1

Having Coolant Replaced

The coolant (such as for scan head cooling and cooling the HyD RLD) must be replaced by
Leica Service every two years.
You can find the safety data sheet for the coolant in the Chapter "Appendix".
Maintenance and replacement of the coolant may only be carried out by service
technicians who are authorized by Leica Microsystems CMS GmbH. Opening or working on
the system in any way shall void any and all warranty claims.
WARNING
19.2 Cooling systems on external lasers and other peripheral
devices
Some external lasers and other peripheral devices can have a cooling circuit independent
from the system and may use different coolants. These cooling circuits must be maintained
corresponding to the notes in the provided Instructions for Use.
NOTICE
Damage to the instrument from not paying attention to the maintenance
Absolutely adhere to the prescribed maintenance intervals, as otherwise
there can be serious damage to the instrument.
Contamination with hazardous substances
Before each call from a service technician, the system has to be cleaned
or disinfected thoroughly to avoid contamination with hazardous
materials. When returning system parts, it must be ensured that they are
free of hazardous substances - otherwise they must not be sent.
Damage to the instruments due to incorrect coolant
Only use the permitted coolants, since otherwise the cooling circuit, the
peripheral device and the entire system could be destroyed. In case of
doubt, notify the Leica branch office in your country or your local contact
person.
Maintenance
99