1.6
1.6.1
General
1.6.2
General
10
For the AC/DC power supply and the battery charger:
WARNING
Unauthorised opening of the product
Either of the following actions may cause you to receive an electric shock:
Touching live components
•
Using the product after incorrect attempts were made to carry out repairs.
•
Precautions:
▶
Do not open the product!
▶
Only Leica Geosystems authorised service centres are entitled to repair
these products.
For the AC/DC power supply and the battery charger:
WARNING
Electric shock due to use under wet and severe conditions
If unit becomes wet it may cause you to receive an electric shock.
Precautions:
▶
If the product becomes humid, it must not be used!
▶
Use the product only in dry environments, for example in buildings or
vehicles.
▶
Protect the product against humidity.
Laser Classification
General
The following chapters provide instructions and training information about
laser safety according to international standard IEC 60825-1 (2014-05) and
technical report IEC TR 60825-14 (2004-02). The information enables the per-
son responsible for the product and the person who actually uses the equip-
ment, to anticipate and avoid operational hazards.
According to IEC TR 60825-14 (2004-02), products classified as laser
☞
class 1, class 2 and class 3R do not require:
laser safety officer involvement,
•
protective clothes and eyewear,
•
special warning signs in the laser working area
•
if used and operated as defined in this User Manual due to the low
eye hazard level.
National laws and local regulations could impose more stringent
☞
instructions for the safe use of lasers than IEC 60825-1 (2014-05)
and IEC TR 60825-14 (2004-02).
Scanning Laser
The laser incorporated in the product produces an invisible beam which
emerges from the rotating mirror.
Safety Directions