Structure Of The Graphical User Interface - Leica TCS SP8 STED 3X User Manual

LAS X
13.2

Structure of the Graphical User Interface

Figure 44:
1 Scaling range
2 Operating mode selection
3 Steps
4 Menu
5 Tab area
6 Working area
Scaling range: 
Using the slider, you can modify the (size) display of the graphical user interface. On the
right next to the slider, there is a reset button which you can use to reset the scaling to the
default setting.
Operating mode selection:
Here you can set the operating mode you would like to use for image acquisition and
analysis independently of your system configuration.
Steps:
Various steps are available depending on the selected operating mode. The TCS SP8 base
module has the following four steps: Configuration, Acquire, Process, Quantify.
Menu:
The File and Help dropdown menus are located here.
82
Structure of the Graphical User Interface
7 Display window
7a Display window settings
7b Image processing and image analysis options
7c Channel display
8 Image acquisition buttons