Warning Messages - Leica TCS SP8 STED 3X User Manual

Hide thumbs Also See for TCS SP8 STED 3X:
Table of Contents

Advertisement

10.7

Warning Messages

Message/Signal
Warning message
in LAS X on the
monitor
Time-based
audible warning
signal at intervals
of 1 second
Time-based
audible warning
signal at intervals
of 2 seconds
Continuous
audible warning
signal
Trigger
Shutter that is defective or not
functioning properly
Defective part in the shutter
safety circuit
Defective relay contact for the
laser emission indicator
connection
During automatic firmware
update
Remedy
For safety reasons, the shutters remain
closed. No further use of the laser is
possible. In this situation, the system
may not be operated. Contact the Leica
branch office in your country or your
contact person.
For safety reasons, the shutters remain
closed. No further use of the laser is
possible. In this situation, the system
may not be operated. Contact the Leica
branch office in your country or your
contact person.
Notify Leica Service immediately. If a
laser emission indicator is connected to
the laser emission indicator connection
and the relay contact is defective, the
system may not be operated.
After the updated component is
automatically restarted, the continuous
audible warning signal stops. During the
automatic update and the automatic
restart of the component, you may not
switch off or restart the system, since
otherwise this can lead to damage to
the system.
Safety Features
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tcs sp8 sted-one

Table of Contents