Selecting The Copy Paper Size (Paper Select) - Canon imageCLASS 2220 Copying Manual

Selecting the Copy Paper Size
You can set the machine to automatically select the paper size, or you can manually
specify a paper size for a copy job.
NOTE
•
When copying an original onto the same size paper at a copy ratio of 100%, the
periphery of the original may be cut off slightly on the copy. For details, see Chapter 8,
"Appendix," in the Reference Guide.
Original
•
If you select the Entire Image mode, the copied image is automatically reduced slightly
based on the copy paper size and the image size. As a result, the entire original image is
reproduced on the copy paper without its periphery being trimmed. (See "Entire Image,"
on p. 1-47.)
(Paper Select)
Copy

Selecting the Copy Paper Size (Paper Select)

1
1-27