Setting Automatic Collate - Canon imageCLASS 2220 Copying Manual

Setting Automatic Collate

This function automatically selects the Collate (Offset Collate) mode when the
originals are placed in the feeder. This is helpful when making multiple copies,
because the user does not need to remember to select the Finisher mode.
NOTE
•
If Auto Collate is set to 'On' and you place the originals in the feeder, the Collate mode is
3
automatically selected as listed below:
- [Offset Collate]: When the Finisher-J1 (optional) is attached or Saddle Finisher-G1
- [Collate]: When the Saddle Finisher-G1 (optional) is attached (Tray A exit slot is not
•
The default setting is 'On'.
1
3-6

Setting Automatic Collate

(optional) is attached (Tray A exit slot is selected)
selected), only the Inner 2way Tray-A1 (optional) is attached, Copy Tray-F1
(optional) is attached, or the Finisher (optional) is not attached
(Additional Functions) © [Copy Settings] © [Auto
Press
Collate].
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.