Suzuki ACROSS 2020 Series Owner's Manual page 152

The error warning indicator on the CCID (Charging Circuit Interrupt-
■
ing Device) flashes.
Likely cause
Electrical leakage detection function or
self-diagnostic function operates and
power is cut off
Charging indicator of the charging port does not illuminate, even
■
though charging connector is connected.
Likely cause
The plug is not properly connected to the
socket
Charging connector is not securely con-
nected to AC charging inlet
Hybrid battery (traction battery) is
already fully charged
The charger does not operate
2-2. Charging
Correction procedure
When the voltage is insufficient, the error
warning indicator may flash when there
is noise interference. Perform a reset
and connect to a proper power source.
(P.107)
If charging does not start, immediately
stop charging and contact a SUZUKI
dealer or a qualified workshop.
Correction procedure
Check whether the plug is properly con-
nected to the socket.
Check the connection status of the
charging connector.
 When connecting the charging con-
nector, insert the charging connector
securely.
 After connecting the charging connec-
tor, check that the charging indicator of
the charging port is turned on.
If the charging indicator of the charging
port does not illuminate, even though the
charging connector is securely con-
nected, there may be a malfunction in the
system. Immediately stop charging and
contact a SUZUKI dealer or a qualified
workshop.
When the hybrid battery (traction battery)
is fully charged, charging is not per-
formed.
Please contact the facility manager when
there is a problem with charger.
149
2