Table of Contents
Advertisement
468
7-3. Do-it-yourself maintenance
6
Drive straight (with occasional
left and right turns) at approxi-
mately 40 km/h (25mph) or
more for approximately 10 to 30
minutes.
When registration is completed, the tire
pressure warning light will go off and
the inflation pressure of each tire will be
displayed on the multi-information dis-
play.
Even if the vehicle is not driven at
approximately 40 km/h (25 mph) or
more, registration can be completed by
driving for a long time. However, if reg-
istration does not complete after driving
for 1 hour or more, perform the proce-
dure again from the beginning.
7
Initialize the tire pressure warn-
ing system. (P.465)
When registering ID codes
■
●
ID code registration is performed
while driving at a vehicle speed of
approximately 40 km/h (25 mph) or
more.
Before performing ID code registra-
●
tion, make sure that no wheels with
tire pressure warning valve and trans-
mitters installed are near the vehicle.
Make sure to initialize the tire pres-
●
sure warning system after registering
the ID codes. If the system is initial-
ized before registering the ID codes,
the initialized values will be invalid.
ID codes can be registered by your-
●
self, but depending on the driving con-
ditions and driving environment,
registration may take some time to
complete.
As the tires will be warm when regis-
●
tration is completed, make sure to
allow the tires to cool before perform-
ing initialization.
Canceling ID code registration
■
To cancel ID code registration after it
●
has been started, select "Identifying
Each Wheel & Position" on the multi-
information display and press and
hold
again.
If ID code registration has been can-
●
celed, the tire pressure warning light
will blink for approximately 1 minute
when the power switch is turned to
ON and then illuminate. The tire pres-
sure warning system will be opera-
tional when the tire pressure warning
light turns off.
If the warning light does not turn off
●
even after several minutes have
elapsed, ID code registration may not
have been canceled correctly. To can-
cel registration, perform the ID code
registration start procedure again and
then turn the power switch off before
driving.
If ID codes are not registered prop-
■
erly
In the following situations, ID code
●
registration may take longer than
usual to be completed or may not be
possible. Normally, registration com-
pletes within approximately 30 min-
utes.
If ID code registration is not complete
after driving for approximately 30 min-
utes, continue driving for a while.
• Vehicle is not parked for approxi-
mately 20 minutes or more before
driving
• Vehicle is not driven at approximately
40 km/h (25 mph) or more
• Vehicle is driven on unpaved roads
• Vehicle is driven near other vehicles
and system cannot recognize tire
pressure warning valve and transmit-
Advertisement
Table of Contents
