Table of Contents
Advertisement
336
5-5. Using the driving support systems
Automatic turn-off of RSA sign dis-
■
play
One or more signs automatically turn off
in the following situations.
No sign has been recognized for a
●
certain distance.
The road changes due to a left or right
●
turn, etc.
Conditions in which the function
■
may not operate or detect correctly
In the following situations, RSA does not
operate normally and may not recognize
signs, display the incorrect sign, etc.
However, this does not indicate a mal-
function.
●
The front camera is misaligned due to
a strong impact being applied to the
sensor, etc.
Dirt, snow, stickers, etc. are on the
●
windshield near the front camera.
In inclement weather such as heavy
●
rain, fog, snow or sand storms.
Light from an oncoming vehicle, the
●
sun, etc. enters the front camera.
The sign is dirty, faded, tilted or bent.
●
●
The contrast of electronic sign is low.
All or part of the sign is hidden by the
●
leaves of a tree, a pole, etc.
The sign is only visible to the front
●
camera for a short amount of time.
The driving scene (turning, lane
●
change, etc.) is judged incorrectly.
If a sign not appropriate for the cur-
●
rently traveled lane, but the sign exists
directly after a freeway branches, or in
an adjacent lane just before merging.
●
Stickers are attached to the rear of the
preceding vehicle.
A sign resembling a system compati-
●
ble sign is recognized.
Side road speed signs may be
●
detected and displayed (if positioned
in sight of the front camera) while the
vehicle is traveling on the main road.
Roundabout exit road speed signs
●
may be detected and displayed (if
positioned in sight of the front camera)
while traveling on a roundabout.
●
The front of the vehicle is raised or
lowered due to the carried load.
The surrounding brightness is not suf-
●
ficient or changes suddenly.
When a sign intended for trucks, etc.
●
is recognized.
The vehicle is driven in a country with
●
a different direction of traffic.
The speed information displayed on
●
the meter and on the navigation sys-
tem may be different due to the navi-
gation system using map data.
Speed limit sign display
■
If the power switch was last turned off
while a speed limit sign was displayed
on the multi-information display, the
same sign displays again when the
power switch is turned to ON.
■
If "RSA Malfunction Visit Your
Dealer" is shown
The system may be malfunctioning.
Have the vehicle inspected by a
SUZUKI dealer or a qualified workshop.
Customization
■
Some functions can be customized.
(Customizable features: P.177)
Advertisement
Table of Contents
