Suzuki ACROSS 2020 Series Owner's Manual page 353

350
5-5. Using the driving support systems
BSM function:
When a vehicle is detected in a blind
spot of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator on the detected side will illumi-
nate. If the turn signal lever is operated
toward the detected side, the outside
rear view mirror indicator will flash.
RCTA function:
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, both outside rear view mirror
indicators will flash.
C
Monitor screen display (RCTA
function only)
If a vehicle approaching from the right
or left at the rear of the vehicle is
detected, the RCTA icon (P.366) for
the detected side will be displayed.
D
BSM OFF indicator/RCTA OFF
indicator
When the Blind Spot Monitor is dis-
abled, the BSM OFF indicator illumi-
nates.
When the RCTA function is disabled,
the RCTA OFF indicator illuminates.
E RCTA buzzer (RCTA function
only)
If a vehicle approaching from the right
or left at the rear of the vehicle is
detected, a buzzer will sound from
behind the rear seat.
Turning the BSM func-
tion/RCTA function on/off
The BSM function and the RCTA
function can be enabled/disabled
on the screen of the multi-infor-
mation display. (P.177)
The BSM function/RCTA function will
be enabled each time the power switch
is turned to ON.
Outside rear view mirror indicators
■
visibility
In strong sunlight, the outside rear view
mirror indicator may be difficult to see.
Hearing the RCTA buzzer
■
The RCTA buzzer may be difficult to
hear over loud noises such as high
audio volume.
When "Blind Spot Monitor Unavail-
■
able" or "RCTA Unavailable" is
shown on the multi-information
display
The sensor voltage has become abnor-
mal, or water, snow, mud, etc., may be
built up in the vicinity of the sensor area
of the rear bumper. (P.363)
Removing the water, snow, mud, etc.,
from the vicinity of the sensor area
should return it to normal.
Also, the sensor may not function nor-
mally when used in extremely hot or
cold weather.
When "Blind Spot Monitor Malfunc-
■
tion Visit Your Dealer" or "RCTA
Malfunction Visit Your Dealer" is
shown on the multi-information
display
There may be a sensor malfunction or
misaligned. Have the vehicle inspected
at a SUZUKI dealer or a qualified work-
shop.
Customization
■
Some functions can be customized.
(P.177)