Table of Contents
Advertisement
342
5-5. Using the driving support systems
speed.
Adjusting the set speed
Adjusting the set speed by the
switch
To change the set speed, press the
"+RES" or "-SET" switch until the
desired set speed is displayed.
1
Increases the speed (Except
when the vehicle has been
stopped by system control in
vehicle-to-vehicle distance con-
trol mode)
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold the
switch to change the speed, and
release when the desired speed is
reached.
In the vehicle-to-vehicle distance
control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*2
or 1 mph (1.6 km/h)
each time the
switch is pressed
Large adjustment: Increases or
decreases in 5 km/h (3.1 mph)
*2
mph (8 km/h)
increments for as long
as the switch is held
In the constant speed control mode
(P.344), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*2
or 1 mph (1.6 km/h)
each time the
switch is pressed
Large adjustment: The speed will con-
tinue to change while the switch is held.
*1
: When the set speed is shown in
"km/h"
*2
: When the set speed is shown in
"MPH"
Increasing the set speed by the
accelerator pedal
1
Accelerate with accelerator
pedal operation to the desired
vehicle speed
2
Press the "-SET" switch
Changing the vehicle-to-
vehicle distance (vehicle-to-
vehicle distance control
mode)
Pressing the switch changes the
vehicle-to-vehicle distance as fol-
lows:
*1
*1
or 5
*1
Advertisement
Table of Contents
