Suzuki ACROSS 2020 Series Owner's Manual page 61

58
1-2. Child safety
1
If installing the child restraint
system to the front passenger
seat is unavoidable, refer to
P.49for the front passenger seat
adjustment.
2
Adjust the seatback angle to the
most upright position. When
installing a forward-facing child
seat, if there is a gap between
the child seat and the seatback,
adjust the seatback angle until
good contact is achieved.
3
If the head restraint interferes
with the child restraint system
installation and the head
restraint can be removed,
remove the head restraint. Oth-
erwise, put the head restraint in
the upper most position.
(P.252)
4
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Securely fix the seat belt to the
child restraint system in accor-
dance to the directions enclosed
with the child restraint system.
5
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature),
secure the child restraint system
using a locking clip.
6
After installing the child restraint
system, rock it back and forth to
ensure that it is installed
securely. (P.59)
Removing a child restraint
■
system installed with a seat
belt
Press the buckle release button
and fully retract the seat belt.
When releasing the buckle, the child
restraint system may spring up due to
the rebound of the seat cushion.
Release the buckle while holding down
the child restraint system.
Since the seat belt automatically reels
itself, slowly return it to the stowing
position.
When installing a child restraint
■
system
You may need a locking clip to install the
child restraint system. Follow the
instructions provided by the manufac-
turer of the system. If your child restraint
system does not provide a locking clip,
you can purchase the following item
from a SUZUKI dealer or a qualified