Suzuki ACROSS 2020 Series Owner's Manual page 112

3
Remove the plug-cord connec-
tor cap.
4
Insert the release key into the
release slot of the CCID
(Charging Circuit Interrupting
Device).
Insert the release key in the direction
shown in the illustration.
5
With the release key fully
inserted into the release slot of
the CCID (Charging Circuit
Interrupting Device), turn the
2-2. Charging
plug-cord connector nut of the
plug-cord to remove the cord.
After the plug-cord is removed, remove
the release key.
Do not leave the vehicle alone with the
plug-cord removed. If the plug-cord is
not installed, water or other foreign mat-
ter may enter the CCID (Charging Cir-
cuit Interrupting Device), resulting in a
malfunction.
6
Align the protrusion of the CCID
(Charging Circuit Interrupting
Device), with the groove of the
plug-cord, insert the plug-cord
into the CCID (Charging Circuit
Interrupting Device), and then
turn the plug-cord connector nut
of the plug-cord to install it.
Make sure that there are no foreign
objects attached to the connection
before installing the plug-cord. Remove
any foreign objects if they are attached.
Otherwise, water or other foreign mat-
ter may enter the CCID (Charging Cir-
cuit Interrupting Device), resulting in a
malfunction.
Turn the plug-cord connector nut of the
plug-cord in the opposite direction of
removal until a click sound is heard and
the plug-cord is secured.
109
2