Suzuki ACROSS 2020 Series Owner's Manual page 348

Immediately after the switch is pressed,
the dynamic radar cruise control indica-
tor will come on. Afterwards, it switches
to the cruise control indicator.
Switching to constant speed control
mode is only possible when operating
the switch with the cruise control off.
2
Accelerate or decelerate, with
accelerator pedal operation, to
the desired vehicle speed (at or
above approximately 30 km/h
[20 mph]) and press the "-SET"
switch to set the speed.
Cruise control "SET" indicator will come
on.
The vehicle speed at the moment the
switch is released becomes the set
speed.
Adjusting the speed setting: P.342
Canceling and resuming the speed set-
ting: P.344
5-5. Using the driving support systems
Dynamic Radar Cruise Con-
trol with Road Sign Assist
When this function is enabled and
the system is operating in vehicle-
to-vehicle distance control mode
(P.340), when a speed limit sign
is detected, the recognized speed
limit will be displayed with an
up/down arrow. The set speed can
be increased/reduced to the recog-
nized speed limit by pressing and
holding the "+RES"/"-SET" switch.
 When the current set speed is
lower than the recognized speed
limit
Press and hold the "+RES" switch.
 When the current set speed is
higher than the recognized
speed limit
345
5