Suzuki ACROSS 2020 Series Owner's Manual page 109

106
2-2. Charging
Grounding (Mode 2 AC
charging cable)
This product must be grounded. In
case of malfunction or break down,
grounding provides a path of least
resistance for electric current to
reduce the risk of electric shock.
This product is equipped with a
grounding conductor and a ground-
ing plug. The grounding plug must
be plugged into an appropriate
socket that is properly installed and
grounded in accordance with all
local codes and ordinances.
WARNING
Grounding precautions
■
Improper connection of the ground-
●
ing conductor increases the risk of
electric shock.
Check with a qualified electrician or
serviceman if you are in doubt as to
whether the product is properly
grounded.
Do not modify the grounding plug
●
provided with the product. If it does
not fit the socket, have a proper
socket installed by a qualified elec-
trician.
Safety functions (Mode 2 AC
charging cable)
The CCID (Charging Circuit Inter-
rupting Device) has the following
safety features.
Electrical leakage detection
■
function
If an electrical leakage is detected
during charging, the power source
will be automatically interrupted,
thus preventing fires or electrical
shocks caused by electrical leak-
age.
If the power source is interrupted, the
error warning indicator flashes.
If the power source is interrupted:
P.107
Automatic check function
■
This is an automatic system check
that is run before charging begins
to check for problems in the opera-
tion of the electrical leakage detec-
tion function.
If a malfunction is found in the electrical
leakage detection function as a result of
the check, the error warning indicator
flashes to inform the user. (P.107)
Temperature detection func-
■
tion
A temperature detection function is
equipped to the plug. While
charging, if heat is generated due
to looseness on the socket side
etc., this function suppresses heat
by controlling the charging current.
Conditions for supplying cur-
■
rent to the vehicle
The CCID (Charging Circuit Inter-
rupting Device) is designed to pre-
vent electrical current from being
supplied to the charging connector
when it is not connected to the
vehicle, even if the plug is inserted
into the socket.