Table of Contents
Advertisement
WARNING
Keep the radar sensor and the
●
radar sensor cover clean at all
times.
A
Radar sensor
B
Radar sensor cover
If the front of the radar sensor or the
front or back of the radar sensor
cover is dirty or covered with water
droplets, snow, etc., clean it.
Clean the radar sensor and radar
sensor cover with a soft cloth to avoid
damaging them.
Do not attach accessories, stickers
●
(including transparent stickers) or
other items to the radar sensor,
radar sensor cover or surrounding
area.
Do not subject the radar sensor or
●
its surrounding area to a strong
impact.
If the radar sensor, front grille, or
front bumper has been subjected to
a strong impact, have the vehicle
inspected by a SUZUKI dealer or a
qualified workshop.
●
Do not disassemble the radar sen-
sor.
Do not modify or paint the radar
●
sensor or radar sensor cover.
In the following cases, the radar
●
sensor must be recalibrated. Con-
tact a SUZUKI dealer or a qualified
workshop for details.
5-5. Using the driving support systems
• When the radar sensor or front
grille are removed and installed, or
replaced
• When the front bumper is replaced
To avoid malfunction of the front
■
camera
Observe the following precautions.
Otherwise, the front camera may not
operate properly, possibly leading to
an accident resulting in death or seri-
ous injury.
Keep the windshield clean at all
●
times.
• If the windshield is dirty or covered
with an oily film, water droplets,
snow, etc., clean the windshield.
• If a glass coating agent is applied to
the windshield, it will still be neces-
sary to use the windshield wipers to
remove water droplets, etc. from
the area of the windshield in front of
the front camera.
• If the inner side of the windshield
where the front camera is installed
is dirty, contact a SUZUKI dealer or
a qualified workshop.
307
5
Advertisement
Table of Contents
