Suzuki ACROSS 2020 Series Owner's Manual page 108

Charging mode
A charging method which does not use charging control to
Mode 1 detect electrical leakages between an external power source
and the vehicle. Does not apply to this vehicle.
A charging method which connects the vehicle to an external
power source through a AC charging cable equipped with a
Mode 2
CCID (Charging Circuit Interrupting Device).
Applies to charging through most household sockets.
A charging method which charges from a charger (such as at a
public charging station) equipped with charging control to
detect electrical leakages. Control to detect electrical leakages
is implemented on the charger side. Therefore, a CCID
(Charging Circuit Interrupting Device) is not equipped to the AC
Mode 3
charging cable.
Not all chargers are equipped with AC charging cables. If there
is no AC charging cable available, use the Mode 3 AC charging
cable equipped to this vehicle. (if equipped)
Identification label
■
Identification labels are attached to the vehicle, AC charging cable and charger to
inform the user of which device they should use.
The meaning of the each identification label is as follows:
Identifica- Supply
tion label type
AC
AC
DC
DC
Outline
Configura-
Standard
tion
EN 62196-2 TYPE 2
EN 62196-2 TYPE 2
EN 62196-3 FF
EN 62196-3 AA
2-2. Charging
Voltage
Type of accessory
range
•Charging port
lid
≤ 480V RMS
•Charging con-
nector
•Charging plug
≤ 480V RMS
•Charger
•Charging port
lid
50V to 500V
•Charging con-
nector
•Charging port
lid
50V to 500V
•Charging con-
nector
105
2