Suzuki ACROSS 2020 Series Owner's Manual page 201

198
4-2. Opening, closing and locking the doors
Using the power back door
■
switch on the back door
Press the switch.
The power back door automatically
closes.
Pressing the switch while the power
back door is operating will stop the
operation. When the switch is pressed
again during the halted operation, the
back door will perform the reverse
operation.
Using the back door handles
■
Lower the back door using the back
A
door handle .
The back door closing assist (P.200)
will be activated, and the power back
door will fully close automatically.
Using the kick sensor (Hands
■
Free Power Back Door)
The Hands Free Power Back Door
enables automatic opening and
closing of the power back door by
putting your foot near the lower
center part of the rear bumper and
moving it away from the rear
bumper. When operating the Hands
Free Power Back Door, make sure
that the power switch is in OFF, the
Hands Free Power Back Door
operation is enabled (P.177) and
you are carrying an electronic key.
1
While carrying an electronic key,
stand within the smart entry &
start system operation range,
approximately 30 to 50 cm (11.8
to 19.7 in.) from the rear
bumper.
A
Kick sensor