Power Sources That Can Be Used - Suzuki ACROSS 2020 Series Owner's Manual

NOTICE
Do not apply excessive force to the
●
charging connector after the
charging connector is inserted.
When removing the charging con-
nector, make sure to unlock the
charging connector.
2-2. Charging
Power sources that can
be used
An external power source that
fulfills the following criteria is
necessary for charging this
vehicle. Confirm this before
charging.
WARNING
Warnings for electrical faults
■
Make sure to observe the precautions
in this Owner's Manual when
charging the vehicle.
Failure to use a power source that ful-
fills the requirements, or failure to
observe regulations while charging
could lead to an accident, possibly
resulting in death or serious injury.
Power sources
 Connect to an AC 220 V - 240 V
socket with a Residual Current
Circuit-Breaker (RCCB) and a
circuit breaker. Use of a 13A indi-
vidual circuit is strongly recom-
mended to ensure AC charging
cable will operate properly.
 We strongly recommend that you
use an exclusive connection
from the junction box for
charging. If you connect on a
socket that is on a shared circuit,
and other electrical appliances
are used on other sockets on the
same circuit, then the circuit
*
breaker might trip.
 Ensure that the junction box is
equipped with a Residual Cur-
117
2