Table of Contents
Advertisement
534
8-2. Steps to take in an emergency
Starting the hybrid system
1
Ensure that the shift lever is in P
and depress the brake pedal.
2
Touch the area behind the but-
tons on the electronic key to the
power switch.
When the electronic key is detected, a
buzzer sounds and the power switch
will turn to ON.
When the smart entry & start system is
deactivated in customization setting,
the power switch will turn to ACC.
3
Firmly depress the brake pedal
and check that
played on the multi-information
display.
4
Press the power switch shortly
and firmly.
In the event that the hybrid system
still cannot be started, contact a
SUZUKI dealer or a qualified work-
shop.
■
Stopping the hybrid system
Shift the shift lever to P, set the parking
brake and press the power switch as
you normally do when stopping the
hybrid system.
Replacing the key battery
■
As the above procedure is a temporary
measure, it is recommended that the
electronic key battery be replaced
immediately when the battery is
depleted. (P.484)
Alarm
■
Using the mechanical key to lock the
doors will not set the alarm system.
If a door is unlocked using the mechani-
cal key when the alarm system is set,
the alarm may be triggered. (P.73)
Changing power switch modes
■
Release the brake pedal and press the
power switch in step
The hybrid system does not start and
modes will be changed each time the
switch is pressed. (P.282)
is dis-
3
above.
Advertisement
Table of Contents
