Suzuki ACROSS 2020 Series Owner's Manual page 110

CCID (Charging Circuit Inter-
rupting Device) indicators
(Mode 2 AC charging cable)
Indicator operation
■
3 indicators are used to indicate the
following conditions.
When a malfunction occurs during charging
■
The indicators on the CCID (Charging Circuit Interrupting Device) use a
combination of different statuses (not illuminated, illuminated or flashing) to
inform the user of internal malfunctions.
When the error warning indicator is illuminated or flashing, temporarily remove the
plug from the socket and then reconnect it to check if the error indicator turns off.
If the error warning indicator turns off, charging is now possible.
If it does not turn off, perform the correction procedure in the following chart.
Power indica-
Status
Not illuminated
Charging system
error
Illuminated
Plug temperature
detection mal- Flashes
function
A
Power indicator
Illuminates when electricity is flowing to
the CCID (Charging Circuit Interrupting
Device).
B
Charging indicator
Illuminates when charging is in prog-
ress.
C Error warning indicator
Flashes when there is an electrical
leakage or when a malfunction occurs
in the CCID (Charging Circuit Interrupt-
ing Device).
Error warning
tor indicator
Not illumi-
nated or illumi-
nated
Flashes
Flashes
2-2. Charging
Cause/Correction procedure
An electrical leakage is
detected and charging is can-
celed, or there is a malfunction
in the AC charging cable.
 Consult a SUZUKI dealer
or a qualified workshop
There is a malfunction in the
plug temperature detection
*1
part.
 Consult a SUZUKI dealer
or a qualified workshop
107
2