Suzuki ACROSS 2020 Series Owner's Manual page 381

Table of Contents

Advertisement

378
5-5. Using the driving support systems
A
Hybrid system output
B
Braking force
C
Time
D
Hybrid system output restriction
control begins operating (Sys-
tem determines that possibility
of collision with detected object
is high)
E
Brake control begins operating
(System determines that possi-
bility of collision with detected
object is extremely high)
If the Parking Support Brake has
operated
If the vehicle is stopped due to operation
of the Parking Support Brake, the Park-
ing Support Brake will be disabled and
the PKSB OFF indicator will illuminate. If
the Parking Support Brake operates
unnecessarily, brake control can be can-
celed by depressing the brake pedal or
waiting for approximately 2 seconds for
it to automatically be canceled. Then,
the vehicle can be operated by depress-
ing the accelerator pedal.
Re-enabling the Parking Support
Brake
To re-enable the Parking Support Brake
when it is disabled due to operation of
the Parking Support Brake, either
enable the system again (P.376), or
turn the power switch off and then back
to ON. Additionally, if the object
becomes no longer in the traveling
direction of the vehicle or if the traveling
direction of the vehicle changes (such
as changing from moving forward to
backing up, or from backing up to mov-
ing forward), the system will be re-
enabled automatically.
If "Parking Support Brake Unavail-
able" is displayed on the multi-
information display and the PKSB
OFF indicator illuminates
If "Clean Parking Assist Sensor" is
displayed simultaneously, a sensor
may be covered with ice, snow, dirt,
etc. In this case, remove the ice,
snow, dirt, etc., from the sensor to
return the system to normal. If this
message is shown even after remov-
ing dirt from the sensor, or shown
when the sensor was not dirty to begin
with, have the vehicle inspected at a
SUZUKI dealer or a qualified work-
shop.
If "Parking Assist Unavailable" is dis-
played simultaneously, water may be
continuously flowing over the sensor
surface, such as in a heavy rain.
When the system determines that it is
normal, the system will return to nor-
mal.

Advertisement

Table of Contents
loading

Table of Contents